2805 Bowers Ave, Santa Clara, CA 95051 | 408-730-2275
sales@colfax-intl.com
My Colfax  

Colfax CX2260i-X6 2U Rackmount Server

 
 

Powerful.Flexible.Efficient

  • Dual Intel® Xeon® Processors E5-2600 v3/v4 Product Family
  • 24 Memory Sockets Support Registered DDR4 (RDIMM), Load Reduced DDR4 (LRDIMM)
  • 8x 3.5” SAS3/SATA3 Hot-Swap Drive Bays
  • 2x 2.5” SATA3 Hot-Swap Rear Drive Bays
  • 2x 2.5" Internal Fixed Mount SSDs
  • Versatile Configuration Options

Features

  • 2-way Intel® Xeon® Processors E5-2600 v3/v4 Product Family
  • Intel C612 Chipset
  • 24 Memory Sockets Support Registered DDR4 (RDIMM), Load Reduced DDR4 (LRDIMM)
  • Supports 3 Riser Cards
    - Riser #1 – PCIe Gen3 x24 – up to 3 PCIe Slots
    - Riser #2 – PCIe Gen3 x24 – up to 3 PCIe Slots
    - Riser #3 – PCIe Gen3 x8 + Gen2 x4 – up to 2 PCIe Slots (Option)
    With 3 Riser Cards installed, up to 8 possible add-in cards can be supported:
    - 4 Full Height / Full Length + 2 Full Height / Half Length add-in cards via Risers #1 and #2
    - 2 Low Profile add-in cards via Riser #3 (Option)
  • Optional I/O Module Support (More Details Below)
  • 8x 3.5” SAS3/SATA3 Hot-Swap Drive Bays
  • 2x 2.5” SATA3 Hot-Swap Rear Drive Bays
  • 2x 2.5" Internal Fixed Mount SSDs
  • Front Panel I/O and Optical Drive Support
  • Low Profile eUSB SSD Support
  • Low Profile SATA Disk-on-Module (DOM) Support
  • Embedded Software SATA RAID 0,1,10 with Optional RAID 5 Key Support (More Details Below)
  • Integrated 2x 10GbE Ports
  • 1x 1100W AC 80+ Platinum Efficiency Power Supply (Optional 2nd Power Supply for Redundancy)
  • Integrated Baseboard Management Controller with IPMI 2.0 Support
  • Optional Advanced Management Features Activated by Key (See Remote Server Management tab for more info)
  • Integrated Video Controller

Optional Features

Rack Mount Kit Options

  • Enhanced Value Rail Kit: Rail allows adjustment within 609.6mm~765mm to fit difference depth rack. Maximum extension when installed (travel distance) 424.2mm. No CMA support.
  • Premium Rail Kit: Full extension and toolless rail kit. Supports cable management arm. Rail allows adjustment within 609.6mm~762mm to fit difference depth rack. Maximum extension when installed (travel distance) 800 mm. Only this rail supports CMA.
  • Cable Management Arm: Cable management arm for Premium 1U/2U rail kit
  • Bracket: Fixed mount bracket kit for 2-post racks

Local Control Panel
The Local Control Panel option utilizes a combination of control buttons and LCD display to provide system accessibility and monitoring.

The LCD (Local Control Display) is a one line character display that resides on the front panel of the chassis. It can display a maximum of 18 characters at a time. This device also contains 3 buttons (Left, Right and Enter). The user can select the content that needs to be displayed on the LCD screen by operating these buttons.

The LCD (Local Control Display) device provides the following features:

  • Displays a banner when the system is healthy. The default banner is the server name
  • Displays active error messages when the system is not healthy
  • Provides basic server management configuration
  • Provides the ability to see asset information without having to open the chassis

** Note: Due to signal strength limits associated with USB 3.0 ports cabled to a front panel, some marginally compliant USB 3.0 devices may not be supported from these ports. In addition, the server system cannot be USB 3.0 certified with USB 3.0 ports cabled to a front panel.


Front Bezel

The optional front bezel is made of Black molded plastic and uses a snap-on design. When installed, its design allows for maximum airflow to maintain system cooling requirements. The front bezel includes a keyed locking mechanism which can be used to prevent unauthorized access to installed storage devices and front I/O ports.


I/O Module

To broaden the standard on-board feature set, the server board provides support for one of several available Intel® I/O Module options. The I/O module attaches to a high density 80-pin connector on the server board and is supported by x8 PCIe Gen3 signals from the IO module of the CPU 1 processor. Supported I/O modules include:

  • 4-port RJ45 1 GbE IO Module based on Intel® Ethernet Controller I350
  • 2-port RJ-45 10GBase-T IO Module based on Intel® Ethernet Controller x540
  • 2-port SFP+ 10Gb Ethernet IO Module based on Intel® 82599 10 Gigabit Ethernet Controller (Supports direct connect or transceiver. Cables/transceivers not included)
  • 1-port QSFP FDR 56 GT/S speed InfiniBand IO Module
  • 2-port QSFP FDR 56 GT/S speed InfiniBand IO Module
  • 1-port QSFP+ 40 GbE IO Module
  • 2-port QSFP+ 40 GbE IO Module

Storage Controller Options

Option 1: Embedded SATA Software RAID Support
The server board has embedded support for two SATA SW-RAID options:

  • Intel® Rapid Storage Technology (RSTe) 4.1
  • Intel® Embedded Server RAID Technology 2 (ESRT2) 1.41 based on LSI* MegaRAID SW RAID Technology

Intel® Rapid Storage Technology (RSTe)
Features of the embedded software RAID option Intel® Rapid Storage Technology (RSTe) include:

  • Based on Intel® SW RAID Technology
  • Software RAID with system providing memory and CPU utilization
  • Supported RAID Levels - 0,1,5,10
    - 8 Port SATA RAID 5 available standard (no option key required)
    - NO SAS RAID support

Intel® Embedded Server RAID Technology 2 (ESRT2)
Features of the embedded software RAID option Intel® Embedded Server RAID Technology 2 (ESRT2) include:

  • Based on LSI MegaRAID Software Stack
  • Software RAID with system providing memory and CPU utilization
  • Supported RAID Levels - 0,1,5,10
    - 8 Port SATA RAID 5 support provided with appropriate Intel® RAID Upgrade Key
    - NO SAS RAID support

Upgrade Key Options

Key Color Description
Default - Blue 8 Port SATA with Intel® ESRT RAID 0,1,10 and Intel® RSTe RAID 0,1,5,10
White 8 Port SATA with Intel® ESRT2 RAID 0,1,5,10 and Intel® RSTe RAID 0,1,5,10


Option 2: Integrated RAID Module Support
In addition to supporting Embedded Software RAID, the system also includes support for Hardware RAID without utilizing a PCIe slot though an Integrated RAID Mezzanine Module. Features include:

  • Does not utilize a PCIe slot on the riser cards
  • SKU options to support full or entry level hardware RAID
  • SKU options to support 1GB embedded memory

Integrated RAID Module Options

Type Description
Entry-level Mezzanine Form Factor Entry-RAID Module, 8 internal ports, LSI3008 IOC with Basic Firmware. Entry HW RAID levels 0,1,1E/10, JBOD Mode, HD Mini-SAS Connectors

Mezzanine Form Factor Entry-RAID Module, 8 internal ports, LSI3008 IOC with Advanced Management, Entry HW RAID levels 0,1,10 & Hybrid 5,50, JBOD Mode, HD Mini-SAS Connectors
Full Mezzanine Form Factor HW RAID Module. 8 internal ports, LSI3108 ROC with 1GB DDR3, RAID Levels 0,1,10,5,50,6,60, HD Mini-SAS Connectors, Supports Maintenance Free Backup Unit

Intel® RAID Maintenance Free Backup Unit is a super-capacitor module and flash memory card designed to help protect data in dynamic memory during a power failure or system crash event.


Option 3: External RAID Controller Card
In addition to Embedded Software RAID and Integrated RAID Module support, the system configurator also includes add-in External RAID Controller Card options. Features include:

  • 12Gb/s SAS / 6Gb/s SATA RAID cards
  • Ideal for configuring external storage enclosures with high-performance SAS hard drives, high-capacity SATA hard drives or application-accelerating solid state drives (SSDs)
  • Meets high I/O transaction demands of database and datacenter applications

eUSB SSD Support
The system provides support for a low-profile eUSB SSD storage device. eUSB features include:

  • 2 wire small form factor USB 2.0 interface to host
  • Read Speed up to 35 MB/s and Write Speed up to 24 MB/s
  • Capacity range from 256GB to 32GB
  • Supports USB Mass Storage Class requirements for Boot capability

SATA DOM Support
The system has support for up to two vertical low profile Disk-on-Module (DOM) devices. Supported SATA DOMs for this server board include those from Apacer* or Innodisk*.

Note: With a SATA DOM device installed, only low profile PCIe* add-in cards can be used in Riser Slot #2


Trusted Platform Module (TPM) Support
The Trusted Platform Module (TPM) option is a hardware-based security device that addresses the growing concern on boot process integrity and offers better data protection. TPM protects the system start-up process by ensuring it is tamper-free before releasing system control to the operating system. A TPM device provides secured storage to store data, such as security keys and passwords. In addition, a TPM device has encryption and hash functions. The server board implements TPM as per TPM PC Client specifications revision 1.2 by the Trusted Computing Group (TCG).

A TPM device is optionally installed onto a high density 14-pin connector labeled “TPM” on the server board, and is secured from external software attacks and physical theft. A pre-boot environment, such as the BIOS and operating system loader, uses the TPM to collect and store unique measurements from multiple factors within the boot process to create a system fingerprint. This unique fingerprint remains the same unless the preboot environment is tampered with. Therefore, it is used to compare to future measurements to verify the integrity of the boot process.

After the system BIOS completes the measurement of its boot process, it hands off control to the operating system loader and in turn to the operating system. If the operating system is TPM-enabled, it compares the BIOS TPM measurements to those of previous boots to make sure the system was not tampered with before continuing the operating system boot process. Once the operating system is in operation, it optionally uses TPM to provide additional system and data security.




Intel, the Intel logo, Xeon, and Xeon Inside are trademarks or registered trademarks of Intel Corporation in the U.S. and other countries.

Remote Management Module

Overview

The integrated BMC has support for basic and advanced server management features. Basic management features are available by default. Advanced management features are enabled with the addition of an optionally installed Remote Management Module 4 Lite (RMM4 Lite) key.

When the BMC FW initializes, it attempts to access the Intel® RMM4 lite. If the attempt to access Intel® RMM4 lite is successful, then the BMC activates the Advanced features.

The following table identifies both Basic and Advanced server management features.

Dedicated Management Port

The server board includes a dedicated 1GbE RJ45 Management Port. The management port is active with or without the RMM4 Lite key installed.

Embedded Web Server

BMC Base manageability provides an embedded web server and an OEM-customizable web GUI which exposes the manageability features of the BMC base feature set. It is supported over all on-board NICs that have management connectivity to the BMC as well as an optional dedicated add-in management NIC. At least two concurrent web sessions from up to two different users is supported. The embedded web user interface shall support the following client web browsers:

  • Microsoft Internet Explorer 9.0*
  • Microsoft Internet Explorer 10.0*
  • Mozilla Firefox 24*
  • Mozilla Firefox 25*

The embedded web user interface supports strong security (authentication, encryption, and firewall support) since it enables remote server configuration and control. The user interface presented by the embedded web user interface, shall authenticate the user before allowing a web session to be initiated. Encryption using 128-bit SSL is supported. User authentication is based on user id and password.

The GUI presented by the embedded web server authenticates the user before allowing a web session to be initiated. It presents all functions to all users but grays-out those functions that the user does not have privilege to execute. For example, if a user does not have privilege to power control, then the item shall be displayed in grey-out font in that user’s UI display. The web GUI also provides a launch point for some of the advanced features, such as KVM and media redirection. These features are grayed out in the GUI unless the system has been updated to support these advanced features. The embedded web server only displays US English or Chinese language output.

Additional features supported by the web GUI includes:

  • Presents all the Basic features to the users
  • Power on/off/reset the server and view current power state
  • Displays BIOS, BMC, ME and SDR version information
  • Display overall system health.
  • Configuration of various IPMI over LAN parameters for both IPV4 and IPV6
  • Configuration of alerting (SNMP and SMTP)
  • Display system asset information for the product, board, and chassis.
  • Display of BMC-owned sensors (name, status, current reading, enabled thresholds), including colorcode status of sensors.
  • Provides ability to filter sensors based on sensor type (Voltage, Temperature, Fan and Power supply related)
  • Automatic refresh of sensor data with a configurable refresh rate
  • On-line help
  • Display/clear SEL (display is in easily understandable human readable format)
  • Supports major industry-standard browsers (Microsoft Internet Explorer* and Mozilla Firefox*)
  • The GUI session automatically times-out after a user-configurable inactivity period. By default, this inactivity period is 30 minutes.
  • Embedded Platform Debug feature - Allow the user to initiate a “debug dump” to a file that can be sent to Intel for debug purposes.
  • Virtual Front Panel. The Virtual Front Panel provides the same functionality as the local front panel. The displayed LEDs match the current state of the local panel LEDs. The displayed buttons (for example, power button) can be used in the same manner as the local buttons.
  • Display of ME sensor data. Only sensors that have associated SDRs loaded will be displayed.
  • Ability to save the SEL to a file
  • Ability to force HTTPS connectivity for greater security. This is provided through a configuration option in the UI.
  • Display of processor and memory information as is available over IPMI over LAN.
  • Ability to get and set Node Manager (NM) power policies
  • Display of power consumed by the server
  • Ability to view and configure VLAN settings
  • Warn user the reconfiguration of IP address will cause disconnect.
  • Capability to block logins for a period of time after several consecutive failed login attempts. The lock-out period and the number of failed logins that initiates the lock-out period are configurable by the user.
  • Server Power Control – Ability to force into Setup on a reset
  • System POST results – The web server provides the system’s Power-On Self Test (POST) sequence for the previous two boot cycles, including timestamps. The timestamps may be viewed in relative to the start of POST or the previous POST code.
  • Customizable ports – The web server provides the ability to customize the port numbers used for SMASH, http, https, KVM, secure KVM, remote media, and secure remote media.

Advanced Management Feature Support (RMM4 Lite)

The integrated baseboard management controller has support for advanced management features which are enabled when an optional Intel® Remote Management Module 4 Lite (RMM4 Lite) is installed. The Intel RMM4 add-on offers convenient, remote KVM access and control through LAN and internet. It captures, digitizes, and compresses video and transmits it with keyboard and mouse signals to and from a remote computer. Remote access and control software runs in the integrated baseboard management controller, utilizing expanded capabilities enabled by the Intel RMM4 hardware.

Key Features of the RMM4 add-on are:

  • KVM redirection from either the dedicated management NIC or the server board NICs used for management traffic; upto to two KVM sessions
  • Media Redirection – The media redirection feature is intended to allow system administrators or users to mount a remote IDE or USB CDROM, floppy drive, or a USB flash disk as a remote device to the server. Once mounted, the remote device appears just like a local device to the server allowing system administrators or users to install software (including operating systems), copy files, update BIOS, or boot the server from this device.
  • KVM – Automatically senses video resolution for best possible screen capture, high performance mouse tracking and synchronization. It allows remote viewing and configuration in pre-boot POST and BIOS setup.

Keyboard, Video, Mouse (KVM) Redirection
The BMC firmware supports keyboard, video, and mouse redirection (KVM) over LAN. This feature is available remotely from the embedded web server as a Java applet. This feature is only enabled when the Intel® RMM4 lite is present. The client system must have a Java Runtime Environment (JRE) version 6.0 or later to run the KVM or media redirection applets.

The BMC supports an embedded KVM application (Remote Console) that can be launched from the embedded web server from a remote console. USB1.1 or USB 2.0 based mouse and keyboard redirection are supported. It is also possible to use the KVM-redirection (KVM-r) session concurrently with media-redirection (media-r). This feature allows a user to interactively use the keyboard, video, and mouse (KVM) functions of the remote server as if the user were physically at the managed server. KVM redirection console supports the following keyboard layouts: English, Dutch, French, German, Italian, Russian, and Spanish.

KVM redirection includes a “soft keyboard” function. The “soft keyboard” is used to simulate an entire keyboard that is connected to the remote system. The “soft keyboard” functionality supports the following layouts: English, Dutch, French, German, Italian, Russian, and Spanish.

The KVM-redirection feature automatically senses video resolution for best possible screen capture and provides high-performance mouse tracking and synchronization. It allows remote viewing and configuration in pre-boot POST and BIOS setup, once BIOS has initialized video.

Other attributes of this feature include:

  • Encryption of the redirected screen, keyboard, and mouse
  • Compression of the redirected screen.
  • Ability to select a mouse configuration based on the OS type.
  • Supports user definable keyboard macros.

KVM redirection feature supports the following resolutions and refresh rates:

  • 640x480 at 60Hz, 72Hz, 75Hz, 85Hz, 100Hz
  • 800x600 at 60Hz, 72Hz, 75Hz, 85Hz
  • 1024x768 at 60Hx, 72Hz, 75Hz, 85Hz
  • 1280x960 at 60Hz
  • 1280x1024 at 60Hz
  • 1600x1200 at 60Hz
  • 1920x1080 (1080p)
  • 1920x1200 (WUXGA)
  • 1650x1080 (WSXGA+)

Remote Console
The Remote Console is the redirected screen, keyboard and mouse of the remote host system. To use the Remote Console window of your managed host system, the browser must include a Java* Runtime Environment plug-in. If the browser has no Java support, such as with a small handheld device, the user can maintain the remote host system using the administration forms displayed by the browser.

The Remote Console window is a Java Applet that establishes TCP connections to the BMC. The protocol that is run over these connections is a unique KVM protocol and not HTTP or HTTPS. This protocol uses ports #7578 for KVM, #5120 for CDROM media redirection, and #5123 for Floppy/USB media redirection. When encryption is enabled, the protocol uses ports #7582 for KVM, #5124 for CDROM media redirection, and #5127 for Floppy/USB media redirection. The local network environment must permit these connections to be made, that is, the firewall and, in case of a private internal network, the NAT (Network Address Translation) settings have to be configured accordingly.

Performance
The remote display accurately represents the local display. The feature adapts to changes to the video resolution of the local display and continues to work smoothly when the system transitions from graphics to text or vice-versa. The responsiveness may be slightly delayed depending on the bandwidth and latency of the network.

Enabling KVM and/or media encryption will degrade performance. Enabling video compression provides the fastest response while disabling compression provides better video quality.

For the best possible KVM performance, a 2Mb/sec link or higher is recommended.

The redirection of KVM over IP is performed in parallel with the local KVM without affecting the local KVM operation.

Security
The KVM redirection feature supports multiple encryption algorithms, including RC4 and AES. The actual algorithm that is used is negotiated with the client based on the client’s capabilities.

Availability
The remote KVM session is available even when the server is powered-off (in stand-by mode). No re-start of the remote KVM session shall be required during a server reset or power on/off. A BMC reset (for example, due to an BMC Watchdog initiated reset or BMC reset after BMC FW update) will require the session to be reestablished.

KVM sessions persist across system reset, but not across an AC power loss.

Usage
As the server is powered up, the remote KVM session displays the complete BIOS boot process. The user is able interact with BIOS setup, change and save settings as well as enter and interact with option ROM configuration screens.

At least two concurrent remote KVM sessions are supported. It is possible for at least two different users to connect to same server and start remote KVM sessions.

Force-enter BIOS Setup
KVM redirection can present an option to force-enter BIOS Setup. This enables the system to enter F2 setup while booting which is often missed by the time the remote console redirects the video.

Media Redirection
The embedded web server provides a Java applet to enable remote media redirection. This may be used in conjunction with the remote KVM feature, or as a standalone applet.

The media redirection feature is intended to allow system administrators or users to mount a remote IDE or USB CD-ROM, floppy drive, or a USB flash disk as a remote device to the server. Once mounted, the remote device appears just like a local device to the server, allowing system administrators or users to install software (including operating systems), copy files, update BIOS, and so on, or boot the server from this device.

The following capabilities are supported:

  • The operation of remotely mounted devices is independent of the local devices on the server. Both remote and local devices are useable in parallel.
  • Either IDE (CD-ROM, floppy) or USB devices can be mounted as a remote device to the server.
  • It is possible to boot all supported operating systems from the remotely mounted device and to boot from disk IMAGE (*.IMG) and CD-ROM or DVD-ROM ISO files. See the Tested/supported Operating System List for more information.
  • Media redirection supports redirection for both a virtual CD device and a virtual Floppy/USB device concurrently. The CD device may be either a local CD drive or else an ISO image file; the Floppy/USB device may be a local Floppy drive, a local USB device, or a disk image file.
  • The media redirection feature supports multiple encryption algorithms, including RC4 and AES. The actual algorithm that is used is negotiated with the client based on the client’s capabilities.
  • A remote media session is maintained even when the server is powered-off (in standby mode). No restart of the remote media session is required during a server reset or power on/off. An BMC reset (for example, due to an BMC reset after BMC FW update) will require the session to be re-established
  • The mounted device is visible to (and useable by) managed system’s OS and BIOS in both pre-boot and post-boot states.
  • The mounted device shows up in the BIOS boot order and it is possible to change the BIOS boot order to boot from this remote device.
  • It is possible to install an operating system on a bare metal server (no OS present) using the remotely mounted device. This may also require the use of KVM-r to configure the OS during install.

USB storage devices will appear as floppy disks over media redirection. This allows for the installation of device drivers during OS installation.

If either a virtual IDE or virtual floppy device is remotely attached during system boot, both the virtual IDE and virtual floppy are presented as bootable devices. It is not possible to present only a single-mounted device type to the system BIOS.

Availability
The default inactivity timeout is 30 minutes and is not user-configurable. Media redirection sessions persist across system reset but not across an AC power loss or BMC reset.

Network Port Usage
The KVM and media redirection features use the following ports:

  • 5120 – CD Redirection
  • 5123 – FD Redirection
  • 5124 – CD Redirection (Secure)
  • 5127 – FD Redirection (Secure)
  • 7578 – Video Redirection
  • 7582 – Video Redirection (Secure)

Technical Specifications

CPU • Two LGA2011-3 (Socket R3) processor sockets
• Supports up to two Intel® Xeon® processors E5-2600 v3/v4 product family
• Maximum supported Thermal Design Power (TDP) of up to 145W
Memory • 24 DIMM slots – 3 DIMMs / Channel – 4 memory channels per processor
• Supports Registered DDR4 (RDIMM), Load Reduced DDR4 (LRDIMM)
• Memory data transfer rates:
- DDR4 RDIMM: 1600 MT/s (3DPC), 1866 MT/s (2DPC) and 2133 MT/s (1DPC)
- DDR4 LRDIMM: 1600 MT/s (3DPC), 2133 MT/s (2DPC & 1DPC)
• DDR4 standard I/O voltage of 1.2V
• Only Error Correction Code (ECC) enabled RDIMMs or LRDIMMs are supported
• Only RDIMMs and LRDIMMs with integrated Thermal Sensor On Die (TSOD) are supported
• Memory RASM Support:
- DRAM Single Device Data Correction (SDDCx4)
- Memory Disable and Map out for FRB
- Data scrambling with command and address
- DDR4 Command/Address parity check and retry
- Intra-socket memory mirroring
- Memory demand and patrol scrubbing
- HA and IMC corrupt data containment
- Rank level memory sparing
- Multi-rank level memory sparing
- Failed DIMM isolation
Chipset • Intel® C612 chipset
External I/O Connections • DB-15 video connectors (back and front)
• RJ-45 Serial-A Port
• Dual RJ-45 Network Interface connectors supporting either:
• Dedicated RJ-45 server management NIC
• Three USB 2.0 / 3.0 connectors on back panel
• Two USB 2.0 / 3.0 connectors on front panel
Internal I/O Connectors / Headers • One Type-A USB 2.0 connector
• One 2x5 pin connector providing front panel support for two USB 2.0 ports
• One 2x10 pin connector providing front panel support for two USB 2.0 / 3.0 ports
• One 2x15 pin SSI-EEB compliant front panel header
• One 2x7pin Front Panel Video connector
• One 1x7pin header for optional Intel® Local Control Panel (LCP) support
• One DH-10 Serial Port B connector
Optional I/O Module Support The following I/O modules utilize a single proprietary on-board connector. An installed I/O module can be supported in addition to standard on-board features and any add-in expansion cards.
• Quad port 1 GbE based on Intel® Ethernet controller I350
• Dual port 10GBase-T Ethernet module based on Intel® X540 10 GbE controller
• Dual SFP+ port 10GbE module based on Intel® 82599 10 GbE controller
• Single Port FDR speed InfiniBand module with QSFP connector
• Dual Port FDR speed InfiniBand module with QSFP connectors
• Single port QSFP+ 40 GbE module
• Dual port QSFP+ 40 GbE module
System Fans • Six managed hot swap system fans
• One power supply fan for each installed power supply module
Riser cards • Supports 3 Riser Cards
- Riser #1 – PCIe Gen3 x24 – up to 3 PCIe Slots
- Riser #2 – PCIe Gen3 x24 – up to 3 PCIe Slots
- Riser #3 – PCIe Gen3 x8 + Gen2 x4 – up to 2 PCIe Slots (Optional)
• With 3 Riser Cards installed, up to 8 possible add-in cards can be supported:
- 4 Full Height / Full Length + 2 Full Height / Half Length add-in cards via Risers #1 and #2
- 2 Low Profile add-in cards via Riser #3 (option)

* Depending on the riser card option installed, Riser Slots #1 and #2 can each support up to two full height full length add-in cards (top and middle slots on each riser) and one full height ½ length add-in card (bottom slot on each riser)

Video • Integrated 2D Video Controller
• 16 MB DDR3 Memory
• High speed Integrated 24-bit RAMDAC
• Single lane PCI-Express host interface running at Gen 1 speed
• Video Modes

** Video resolutions at 1600x1200 and higher are only supported through the external video connector located on the rear I/O section of the system. Utilizing the optional front panel video connector may result in lower video resolutions.

The server board provides two onboard video interfaces. The primary video interface is accessed using a standard 15-pin VGA connector found on the back edge of the server board. In addition, video signals are routed to a 14-pin header labeled “FP_Video”, allowing for the option of cabling to a front panel video connector. Attaching a monitor to the front panel video connector will disable the primary external video connector on the back edge of the board.

On-board Storage Controllers and Options • 10 x SATA 6Gbps ports (6Gb/s, 3 Gb/s and 1.5Gb/s transfer rates are supported)
- Two single port SATA connectors capable of supporting up to 6 Gb/sec
- Two 4-port mini-SAS HD (SFF-8643) connectors capable of supporting up to 6 Gb/sec /SATA
• One eUSB 2x5 pin connector to support 2mm low-profile eUSB solid state devices
• Optional SAS IOC/ROC support via on-board Intel® Integrated RAID module connector
• Embedded Software SATA RAID
- Intel® Rapid Storage RAID Technology (RSTe) 4.1
- Intel® Embedded Server RAID Technology 2 (ESRT2) 1.41 with optional RAID 5 key support
Security • Intel® Trusted Platform Module (TPM) (Option)
Server Management • Integrated Baseboard Management Controller, IPMI 2.0 compliant
• Support for Intel® Server Management Software
• On-board RJ45 management port
• Advanced Server Management via an Intel® Remote Management Module 4 Lite (Optional)
Power Supply • The server system can have up to two power supply modules installed, providing support for the following power configurations: 1+0, 1+1 Redundant Power, and 2+0 Combined Power
• 2x 1100W AC 80+ Platinum Efficiency Power Supplies
Storage Bay • 12Gb/s Hot Swap Backplane
• 8x 3.5” SATA/SAS Hot Swap Hard Drive Bays
• 2x 2.5” SATA3 Hot-Swap Rear Drive Bays
• 2 x internal fixed mount 2.5” SSDs
• Front panel I/O and optical drive support
Supported Rack Mount Kit Accessory Options • Tool-less rack mount rail kit – 800mm max travel length
• Enhanced value rack mount rail kit - 424mm max travel length
• Cable Management Arm
• 2-post fixed mount bracket kit
Dimensions • 2U Rackmount
• 16.93" x 27.95" x 3.44"

Images

Solution Configurator

To review or customize any node in this solution, please select
the node ->    
The Current Solution Value (cost as configured) is $2,219.47


 

  Qty.Colfax CX2260i-(T)-X6 2U Rackmount Server, Cost As Configured $2,219.47
Base Platform 1
Advanced Management 1
Redundant Power Supply 1
Local Control Panel 1
Front Bezel 1
Rackmount Kit 1
Cable Management 1
Primary CPU 1
Secondary CPU 1
CPU 1 - Socket 1 of 12    1

Set next    items (  ) like this
CPU 1 - Socket 2 of 12    1
CPU 1 - Socket 3 of 12    1
CPU 1 - Socket 4 of 12    1
CPU 1 - Socket 5 of 12    1
CPU 1 - Socket 6 of 12    1
CPU 1 - Socket 7 of 12    1
CPU 1 - Socket 8 of 12    1
CPU 1 - Socket 9 of 12    1
CPU 1 - Socket 10 of 12    1
CPU 1 - Socket 11 of 12    1
CPU 1 - Socket 12 of 12    1
CPU 2 - Socket 1 of 12    1

Set next    items (  ) like this
CPU 2 - Socket 2 of 12    1
CPU 2 - Socket 3 of 12    1
CPU 2 - Socket 4 of 12    1
CPU 2 - Socket 5 of 12    1
CPU 2 - Socket 6 of 12    1
CPU 2 - Socket 7 of 12    1
CPU 2 - Socket 8 of 12    1
CPU 2 - Socket 9 of 12    1
CPU 2 - Socket 10 of 12    1
CPU 2 - Socket 11 of 12    1
CPU 2 - Socket 12 of 12    1
DVD-ROM Drive 1
DVD+/-RW Drive 1
Rear SSD Drive 1    1

Set next    items (  ) like this
Rear SSD Drive 2    1
Rear Hotswap Cage 1
Disk Drive 1    1

Set next    items (  ) like this
Disk Drive 2    1
Disk Drive 3    1
Disk Drive 4    1
Disk Drive 5    1
Disk Drive 6    1
Disk Drive 7    1
Disk Drive 8    1
Int Storage Keys 1
Int RAID Options 1
RAID Controller Software 1
Battery Backup 1
Ext RAID Controller 1
Fibre Channel/iSCSI 1
Infiniband HBA 1
Ethernet HBA 1
I/O Expansion 1
TPM Module 1
Operating System SW 1
   Colfax CX2260i-(T)-X6 2U Rackmount Server, Cost As Configured $2,219.47